Clicker Manual

Mastering the Tippmann Clicker: A Comprehensive Guide

  • For Clicker Manual Click here

Introduction

The Tippmann Clicker is a powerful air-operated die-cutting machine designed to achieve precision cutting of materials such as leather, fabric, gasket material, plastic, and textiles. Available in two models, the Clicker 700 and Clicker 1500, this machine is a staple in the toolkit of professionals in various industries. This comprehensive guide will help you set up, operate, maintain, and troubleshoot your Tippmann Clicker to ensure optimal performance and longevity.

Unpacking and Setup

When you receive your Tippmann Clicker, ensure all components are present. The package includes the Clicker machine, a cutting board, and necessary tools for setup. Follow these steps to set up your machine:

  1. Mounting: Carefully remove the Clicker from its shipping container. The Clicker 700 weighs approximately 260 lbs, and the Clicker 1500 weighs approximately 560 lbs. Ensure you have sufficient help to prevent injury or damage. Place the machine on a sturdy workbench capable of supporting its weight and operational activities.
  2. Connecting the Air Supply: Attach the air supply to the Clicker's 1/4” quick connect fitting. The machine operates optimally at 110 PSI but should not exceed 120 PSI.

Basic Operation

Operating the Tippmann Clicker involves using either the die blade up or die blade down configuration. Here's a step-by-step guide:

  1. Die Configuration:

    • For die blade up, mount the HDPE cutting board on top.
    • For die blade down, place the HDPE cutting board on the bottom.
    • The HDPE cutting board is a sacrificial surface and will need replacement over time.

  2. Cutting Process:

    • Place your material and die on the cutting board.
    • Use the dual palm buttons to operate the machine, ensuring safety by requiring both hands to initiate the cut.

Adjusting Cutting Depth

To achieve precise cuts, adjusting the cutting depth is essential:

  1. Disconnect Air Supply: Before making adjustments, disconnect the air supply and cycle the Clicker to remove any remaining pressurized air.
  2. Adjust Bolts:
    • Locate the four cutting deck adjustment bolts.
    • Loosen the locking nuts and turn each bolt counterclockwise 1/4 turn to increase the cutting depth.
    • Reconnect the air supply and perform a test cut. Repeat adjustments as necessary.

Maintenance and Troubleshooting

Regular maintenance ensures the longevity and performance of your Clicker:

  1. Cleaning: Keep the machine clean by using an air compressor with a moisture filter to prevent moisture buildup.
  2. Lubrication: Regularly lubricate the moving parts as specified in the manual.

Common Issues and Solutions:

  • Incomplete Cuts: Check for air leaks and ensure the die’s cutting edge is not dull. Adjust the cutting depth if necessary.
  • Air Leaks: Inspect the control box and underside of the press for leaks. Replace faulty fittings or hoses as needed.

Advanced Techniques

Maximize the potential of your Clicker with these advanced techniques:

  1. Custom Die Service: Tippmann offers custom die manufacturing to suit specific needs, providing a wide range of die specifications and fast delivery times.
  2. Using Larger Dies: Dies larger than the Clicker's cutting bed can be used by overhanging the die and material, making multiple cuts as needed.

Warranty and Repair

Tippmann Industrial Products, Inc. provides a one-year warranty against defects in materials and workmanship. For warranty and non-warranty repairs, contact Tippmann Industrial for support. Ensure you have the necessary information, including your name, address, and telephone number, when seeking assistance.

 

The Tippmann Clicker is an essential tool for precision die-cutting across various materials. By following this comprehensive guide for setup, operation, maintenance, and troubleshooting, you can ensure your Clicker operates efficiently and effectively. For more detailed instructions and diagrams, refer to the Tippmann Clicker Manual.

Enhance your productivity and achieve professional-quality results with the Tippmann Clicker, a reliable and powerful addition to your workshop.